• Condition Monitoring
  • Continuous Monitoring
  • condition monitoring sensors
  • Industrial Assets

Best Continuous Condition Monitoring Systems for Industrial Compressors 2027

Alex Vedan

Updated Nov 17, 2026

10 min.

Key Points

  • Screw, reciprocating and centrifugal compressors fail in different places, so judge each system by the rotor, valve, impeller and bearing faults on your machines.
  • Vibration alone gives a weak view of motor winding faults and valve leakage, so ask each vendor which signals it measures.
  • Price the program against your own downtime cost per hour with an ROI calculator before comparing vendor quotes.

Picking a condition monitoring tool for compressors starts with the compressor type. A rotary screw airend wears its thrust bearings and rotor lobes, a reciprocating machine wears valves and crosshead parts, and a centrifugal compressor drifts out of balance as its impeller fouls. The motor driving each one adds its own electrical faults.

One tripped plant air compressor can stop paint booths, pneumatic tools and packaging lines at the same time, which is why reliability teams in automotive and food and beverage plants put compressors near the top of the criticality list. This guide compares five continuous monitoring systems for compressors: Tractian, Emerson, Fluke Reliability, AssetWatch and SKF.

Learn more about compressor monitoring.

What should a compressor monitoring system catch?

A compressor monitoring system should catch the faults that stop your specific compressor type, early enough to schedule the repair during a planned outage. That means bearing and rotor faults on screw machines, valve and running gear faults on reciprocating machines, imbalance on centrifugals, and electrical faults on the drive motor.

Screw compressors

In an oil-flooded screw compressor, the thrust bearings at the discharge end carry the axial load created by discharge pressure. When they wear, energy rises at the bearing defect frequencies and the rotors begin to shift axially, which changes how the male and female lobes mesh.

Rotor mesh problems appear at the lobe pass frequency: the number of lobes on the male rotor times its running speed, plus harmonics. Oil-free screw machines add timing gears, so gear mesh frequency and its sidebands belong on the watch list too. Poor lubrication shows up first as friction, which ultrasound hears before vibration rises.

Reciprocating compressors

Valves are the most frequent repair item on many reciprocating compressors. A broken valve plate or weak spring lets gas leak back, the valve cover runs hotter than its neighbors, and capacity drops. Valve faults read best in temperature, ultrasound and pressure data rather than frame vibration.

The running gear tells its story in vibration. Worn crosshead pins, loose rod nuts, worn rider bands and loose frame bolts produce impacts that repeat once per revolution. These machines turn slowly, so the sensor and the analytics need to handle low frequencies and impact events, not just overall vibration levels.

Centrifugal compressors

Centrifugal compressors run fast, and small changes matter. Fouling on the impeller adds mass unevenly, which shows up as rising vibration at running speed. Misalignment between the motor, the bull gear and the pinions appears at 1x and 2x running speed, and blade or vane pass frequencies change when flow conditions shift toward surge.

Large process centrifugals often have wired proximity probes tied to a protection system. Integrally geared plant air centrifugals, their gearboxes and their motors often do not, and that is where wireless continuous monitoring adds coverage.

The motor driving it

Compressor motors are usually large, and a failure stops the compressor even when the airend is healthy. Broken rotor bars, stator winding faults, insulation breakdown and voltage imbalance appear in current and voltage data. Vibration can hint at some of these, but it cannot tell a supply problem from a failing winding.

Compressor fault coverage by system

Compressor faultTractianEmersonFluke ReliabilityAssetWatchSKF
Compressor types namedScrew, reciprocating and centrifugal compressorsCompressors named among monitored rotating assetsContact vendor for current detailsDedicated compressor programContact vendor for current details
Signals measuredSmart Trac Ultra: vibration, ultrasound, temperature, RPM. Energy Trac: current, voltage, power factorTriaxial vibration, temperature and speedTriaxial vibrationVibration, temperature and oil analysis; three-phase current on motorsVibration (acceleration and velocity) and temperature
Bearing faults (screw thrust bearings, motor bearings)Mechanical faults on the compressor, named by Auto DiagnosisBearing degradation and lubrication issuesContact vendor for current detailsInner race, outer race and rolling element defectsEarly bearing defects
Rotor mesh and gear faults (screw airends)Covered by mechanical fault diagnosis on the airendContact vendor for current detailsContact vendor for current detailsCoupling and drive train issuesEarly gear defects
Imbalance and misalignment (centrifugal impellers, couplings)Part of compressor mechanical diagnosisImbalance and misalignmentContact vendor for current detailsImbalance and shaft misalignmentContact vendor for current details
Looseness and resonance (reciprocating frames, bases)Mechanical faults on frames and bases, diagnosed by AILoosenessContact vendor for current detailsMechanical looseness and resonanceContact vendor for current details
Lubrication and oil conditionLubrication condition through ultrasoundLubrication issuesContact vendor for current detailsWear particles, contamination and lubricant degradation (oil analysis)Contact vendor for current details
Motor electrical faultsElectrical faults on the drive motor (Energy Trac)Contact vendor for current detailsContact vendor for current detailsWinding degradation, phase unbalance and overloadContact vendor for current details
Review of findingsAutomated diagnosis, with human review by Tractian engineers when neededAnalyst review in the as-a-service bundleRemote Condition Monitoring analystsCondition monitoring engineer reviews findingsContact vendor for current details
Network4G/LTE, no plant Wi-Fi neededWirelessHART networkContact vendor for current detailsCellularWireless, through a gateway
Pricing modelCustom quote scoped to your assetsQuoted on requestContact vendor for current detailsQuoted on requestContact vendor for current details

1. Tractian

Best for: Plants that want the compressor and its drive motor watched mechanically and electrically in one place, using wireless sensors that go on in minutes and feed the maintenance systems already in place.

How Tractian monitors compressors

Tractian covers screw, reciprocating and centrifugal compressors. One Smart Trac Ultra mounts on the compressor and reads vibration, ultrasound, temperature and RPM, with sampling up to 64 kHz. The drive motor gets its own sensor.

Auto Diagnosis turns those signals into a named mechanical fault on the compressor. Each alert is ranked by severity and asset criticality and comes with the likely root cause and next steps.

Energy Trac sits in the electrical panel that feeds the drive motor, reading current, voltage and power factor on that circuit to catch electrical faults on the motor. Pairing Smart Trac Ultra on the compressor with Energy Trac on the motor's circuit is Tractian multimodal monitoring: mechanical and electrical evidence for the same compressor train in one diagnosis. Janus, the industrial AI behind it, learns how each compressor runs under its usual load and operating regime, so a genuine deviation stands apart from normal load and unload swings.

Deployment and integrations

  • Quick install: Smart Trac Ultra bonds or screws to the compressor and goes live over 4G/LTE, with no plant Wi-Fi, cabling or IT project, and full visibility is expected within the first 14 days. Its battery runs up to 5 years.
  • Classified and wet areas: Gas compressors in classified process units can carry the same sensor, which is Class I Div 1 ATEX/IECEx/NFPA compliant and sealed to IP69K.
  • Motor side: Energy Trac installs in the motor's panel with no process interruption, so the compressor keeps running.
  • Integrations: Each compressor alert goes to the CMMS the plant already runs, such as MaintainX, Fiix, UpKeep or Limble, or to SAP and Oracle NetSuite on the ERP side, via Tractian integrations, and an API opens the same data to SCADA and APM systems.
  • Dashboards and reports: Compressor data feeds custom dashboards and reports through Excel, Power BI or the SQL connector, so failure, downtime and cost trends land in the format each team reviews.
  • Support: Tractian specialists install the sensors, train the team and stay connected with field crews from pilot to scale. Expert-vetted human review backs up an alert when the team wants it checked.

Customer results

Danone runs homogenizers, pumps and compressors continuously in its dairy production, so an unexpected stop on any of them is a direct production risk. After deploying Tractian condition monitoring on critical assets, the AI flagged a rising vibration profile on a homogenizer pulley that pointed to possible misalignment. The field inspection confirmed wear on the connecting rods and the block, the kind of running gear wear a reciprocating machine develops.

The planned repair avoided up to $40,000 in maintenance costs, 3 to 30 days of production stoppage and an estimated $120,000 to $600,000 in commercial impact. A second alert caught a lubrication anomaly in a cheese-processing vessel's gearbox, where the oil viscosity was wrong for the equipment; correcting it avoided a $7,600 gearbox replacement.

Tractian pricing

Tractian prices compressor monitoring around the compressors you need to protect. A specialist looks at which machines are critical, whether they are screw, reciprocating or centrifugal, which faults they are prone to, and whether each train needs sensing on the airend, the motor or both. The result is a custom quote built on that coverage; see Tractian pricing to start one.

Questions to ask before you buy

  • Will the compressor sensor hear lubrication friction in ultrasound as well as vibration?
  • Will the alert name the fault and the next step?
  • Can motor electrical faults appear in the same view as the airend data?
  • How quickly can sensors go live in a compressor room without plant Wi-Fi?
  • Which CMMS or ERP will receive the work orders?

2. Emerson

Best for: Companies that want wireless vibration monitoring on a WirelessHART network, with analysis in Emerson AMS software.

Notable features

Emerson's AMS Wireless Vibration Monitor reads triaxial vibration, temperature and speed. Built-in analytics identify failure modes across motors, pumps, fans, gearboxes, compressors and conveyors, including bearing degradation, imbalance, misalignment, looseness and lubrication issues.

  • Data collection: Readings come on a schedule, on alarm or on demand.
  • Network: Sensors connect over a self-organizing WirelessHART network.
  • Software: Analysis runs in AMS Machine Works, which can combine wireless data with Emerson's AMS 6500 ATG protection system.
  • Service option: AMS Machine Works Connect bundles hardware, cloud software and installation, with an analyst reviewing alarms.

Emerson pricing

Emerson shares AMS pricing on request.

Questions to ask before you buy

  • Which compressor types are the built-in analytics configured for?
  • Does the plant need a WirelessHART network before the first sensor goes live?
  • Which services are inside the as-a-service bundle, and which cost extra?
  • How does the system cover the compressor motor's electrical faults?

3. Fluke Reliability

Best for: Teams that want Fluke wireless triaxial vibration sensors feeding eMaint condition monitoring and work orders.

Notable features

Fluke wireless triaxial vibration sensors send data to eMaint condition monitoring, where alarms are set on overall vibration or narrowband signatures for the four major rotating machinery faults. The Fluke diagnostic engine returns prioritized recommendations in plain language.

  • Work orders: Sensor alarms can trigger eMaint work orders and email alerts automatically.
  • Analysis views: FFT spectrum and cascade views sit next to the asset's maintenance history.
  • Remote service: A Remote Condition Monitoring team of analysts monitors assets and interprets the data.

Fluke Reliability pricing

Fluke Reliability gives eMaint and sensor pricing in a sales quote rather than a public list.

Questions to ask before you buy

  • Which compressor-specific faults, such as rotor mesh wear, does the diagnostic engine report?
  • Is the Remote Condition Monitoring service included or priced separately?
  • Does data reach eMaint without plant Wi-Fi or Ethernet?
  • Which signal covers stator and rotor faults on the drive motor?

4. AssetWatch

Best for: Plants that want a monthly monitoring program that combines vibration, electrical and oil analysis, with each finding reviewed by an assigned engineer.

Notable features

AssetWatch wireless vibration sensors mount at bearing housings and other measurement points, and the monitored conditions include bearing defects, imbalance, misalignment, looseness, coupling issues, resonance and valve wear, which it tracks through pressure and flow deviations.

  • Oil analysis: Wear particles, contamination and lubricant degradation are tracked alongside vibration.
  • Electrical monitoring: Three-phase current, RPM and panel temperature flag winding degradation, phase unbalance and overload.
  • Review: A condition monitoring engineer validates findings before they reach the team, and recommendations go to the customer's CMMS.
  • Network: Sensors use a cellular network.

AssetWatch pricing

AssetWatch quotes pricing on request rather than publishing it.

Questions to ask before you buy

  • Which valve faults need pressure or flow data, and who supplies those signals?
  • Is oil analysis part of the monthly fee?
  • How long does engineer review take before an alert reaches the team?
  • What happens to the sensors and the data if the subscription ends?

5. SKF

Best for: Plants that want SKF Enlight Collect IMx-1 vibration and temperature sensors reporting to an SKF gateway.

Notable features

The SKF Enlight Collect IMx-1 sensor collects overall and dynamic vibration data, broadband acceleration and velocity, and temperature. Early defects in bearings and gears are detected through an acceleration measurement.

  • Hazardous areas: The IMx-1-EX sensor carries ATEX and IECEx approval for Zone 1.
  • Network: Sensors report to an SKF gateway.

SKF pricing

SKF has no public IMx-1 price list; the system is quoted on request.

Questions to ask before you buy

  • Who analyzes the data: plant staff, SKF or a distributor?
  • Which compressor faults has the system been set up to report?
  • Is there an option for electrical monitoring on the motor?
  • What do the gateway and network add to the installed cost?

How to estimate the payback on compressor monitoring

Payback on compressor monitoring comes from the stops you avoid and the cheaper planned repairs you get in their place, set against the program cost. Your own numbers decide the answer, and five inputs cover most of it.

InputWhat to enterWhere to find it
A. Unplanned stops per yearUnplanned compressor trips or failures over the last two years, divided by twoMaintenance history in the CMMS
B. Hours lost per stopAverage hours from trip to full air or gas supply restoredWork orders, shift logs
C. Downtime cost per hourLost production, scrap and overtime for one hour without the compressorProduction and finance
D. Repair cost differenceAverage emergency repair cost minus the planned repair cost for the same faultPast invoices and parts records
E. Program cost per yearSensors, software and services from the vendor quoteVendor quote

Annual benefit is A × (B × C + D) for the stops the system would have caught early. Payback in months is E ÷ (annual benefit ÷ 12). Run it with a conservative share of stops caught, such as half, and see whether the program still pays back inside a year.

The online condition monitoring ROI calculator asks for the same kind of inputs, including downtime cost per hour, number of assets, availability and man-hour rates, and builds the report for you.

For motor-level detail, compare machine health monitoring systems for motors.

Frequently Asked Questions

Can wireless sensors monitor a reciprocating compressor?

Yes for the running gear, with limits. A vibration sensor on the frame or crosshead guide picks up impacts and looseness from worn crosshead pins, loose rod nuts and frame bolts, but valve leakage shows up more clearly in valve cover temperature, ultrasound and pressure data. Many plants pair continuous frame vibration with periodic valve checks and confirm the exact fault list with the vendor before buying.

How often should a compressor monitoring sensor take readings?

Monthly routes leave weeks between readings, which is long enough for a starved screw bearing or a loose rod nut to progress. Continuous systems sample on a fixed schedule; Tractian sensors take a reading at 10-minute intervals by default. Shorter intervals matter most on compressors that cycle between load and unload, where a single snapshot can miss the condition that causes damage.

Is motor current monitoring worth adding on compressor motors?

On large compressor motors it often is, because rotor, stator and insulation faults develop in the electrical signal before they show up as vibration. Current data also shows how the compressor loads and unloads, which helps separate a process change from a mechanical fault. From the panel that supplies the motor, Tractian Energy Trac follows current, voltage and power factor and goes in without interrupting the process.

See Tractian on Your Compressors

Bring the list of compressors that stopped production in the last two years, with their type and drive motor size. A Tractian specialist will go compressor by compressor through the faults that Smart Trac Ultra on the compressor and Energy Trac on the motor's panel would track, how alerts reach the team and what that coverage costs. Start a Tractian compressor monitoring demo.

Alex Vedan
Alex Vedan

Director

Alex Vedan, Marketing Director at Tractian, develops impactful strategies that empower industrial clients across North America and LATAM to achieve operational excellence. By aligning innovation with customer needs, he ensures Tractian solutions drive meaningful improvements in efficiency and reliability.

Share

Start Exploring Tractian Condition Monitoring